Norma Group - Logo - NORMA Americas Distribution Services

NORMA Americas Distribution Services featuring:

 

ABA - Logo - NORMA Americas Distribution ServicesBreeze - Logo - NORMA Americas Distribution ServicesNorma - Logo - NORMA Americas Distribution ServicesFiveStar - Logo - NORMA Americas Distribution ServicesR.G.Ray - Logo - NORMA Americas Distribution ServicesTorca - Logo - NORMA Americas Distribution Services

Call Today

1-855-NORMA-2U

667-6228

For Vehicle OE Solutions

 

Infrastructure

Infrastructure - NORMA Americas Distribution Services

Areas of Usage

1
Commercial Building

Applications include: Drain, Waste Disposal, Venting , Water Supply, and Service repair

2
Sanitary/Drainage

Applications include: Drain, Waste Disposal, Venting

3
Water Management

Applications include: Drain, Waste, Venting, Water supply, purification systems, and Service repair

4
Ship Building/Repair

Applications include: Machinery, Equipment, Water supply, Fire Fighting systems, and Service repair


Commercial Building

BREEZE MINI - NORMA Americas Distribution Services

Breeze Mini

Breeze - Logo - NORMA Americas Distribution Services

A lightweight, streamlined clamp generally used in small diameter applications, such as air and fuel lines. The streamlined configuration allows for installation in tight-fitting or difficult-to-reach areas.

  • 5⁄16" (7.9mm) Band with Arcial Perforations
  • Diameter Range: 7⁄32" – 2½" (5.6mm – 64mm)
  • SAE Standard J1508 Type M
  • Three-Piece Construction
  • Plated 410, 300-Series SS and 316 Stainless Steel
Download PDF
Back to Top
BREEZE POWER-SEAL® - NORMA Americas Distribution Services

Breeze Power-Seal®

Breeze - Logo - NORMA Americas Distribution Services

A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength.

  • 1/2" Band with Arcial Perforations
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Diameter Range 7/16" – 7"
  • Plated, 410, 300-Series SS & 316 Stainless Steel
Download PDF
Back to Top
Breeze Aero Seal - NORMA Americas Distribution Services

Breeze Aero-Seal®

Breeze - Logo - NORMA Americas Distribution Services

The original perforated stainless steel worm-drive clamp for aircraft and industrial applications.

  • 9/16" Band with Arcial Perforations
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Diameter Range 7/16" – 12 1/4"
  • Three Screw Options
Download PDF
Back to Top
BREEZE LINER - NORMA Americas Distribution Services

Breeze Liner

Breeze - Logo - NORMA Americas Distribution Services

Liner clamps afford maximum protection to soft hoses while providing a true concentric seal.

  • 1/2" Lined Band
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Larger Sizes have 9/16" Band
  • Diameter Range 7/16" – 7"
  • Plated, 410 Stainless Steel
Download PDF
Back to Top
BREEZE MAKE-A-CLAMP kit - NORMA Americas Distribution Services

Breeze Make-A-Clamp

Breeze - Logo - NORMA Americas Distribution Services

A maintenance "clamp system" that allows you to make any size 100% stainless steel worm-drive clamp.

  • 1/2" Wide Continuous Roll of Banding Material
  • 9/16" Wide Fasteners
  • 100% Stainless Steel
  • Custom Diameter Ranges
  • 410 Stainless Steel Screw
Download PDF
Back to Top
ABA ORIGINAL S20(W2) - NORMA Americas Distribution Services

ABA Original S20(W2)

ABA - Logo - NORMA Americas Distribution Services

An embossed worm-drive hose clamp with a one-piece housing, and an embossed band with rolled edges.

  • Embossed Band with Rolled Edges
  • Innovative Jointless Housing
  • SAE Standard J1508 Type FE
  • Diameter Range 15mm – 307mm
  • Slotted Hex-Head Screw
  • 12mm Band Width
  • Iconic Blue Housing
Download PDF
Back to Top
ABA ORIGINAL S40 W4 - NORMA Americas Distribution Services

ABA Original S40(W4)

ABA - Logo - NORMA Americas Distribution Services

An embossed worm-drive hose clamp with a one-piece housing, and an embossed band with rolled edges.

  • Embossed Band with Rolled Edges
  • Innovative Jointless Housing
  • SAE Standard J1508 Type FE
  • Diameter Range 15mm – 307mm
  • Slotted Hex-Head Screw
  • 12mm Band Width
  • Stainless Steel Housing
Download PDF
Back to Top
ABA ORIGINAL S50(W5) - NORMA Americas Distribution Services

ABA Original S50(W5)

ABA - Logo - NORMA Americas Distribution Services

An embossed worm-drive hose clamp with a one-piece housing, and an embossed band with rolled edges.

  • Embossed Band with Rolled Edges
  • Acid-Resistant Steel
  • SAE Standard J1508 Type FE
  • Diameter Range 15mm – 308mm
Download PDF
Back to Top
ABA ORIGINAL S20(W2) - NORMA Americas Distribution Services

ABA Safe™ W1

ABA - Logo - NORMA Americas Distribution Services

A constant-tension worm-drive clamp that protects soft hoses against damage.

  • 12mm Band Width
  • Concave Liner to Protect Soft Hoses
  • Innovative Jointless Housing
  • Diameter Range 32mm – 112mm
  • Slotted Hex-Head Screw
  • 301 Stainless Steel Cold Rolled Liner
  • Iconic Blue Housing
Download PDF
Back to Top
ABA NOVA ALL STAINLESS S50 (W5) - NORMA Americas Distribution Services

ABA Nova All Stainless S50 (W5)

ABA - Logo - NORMA Americas Distribution Services

A non-perforated worm-drive hose clamp with a rolled-edge band that is an ideal choice for smaller dimension hoses.

  • Embossed 9mm Band with Rolled Edges
  • Innovative Jointless Housing
  • SAE Standard J1508 Type FE
  • Diameter Range 8mm – 20mm 
  • All 316 Stainless Steel
  • Slotted Hex-Head Screw
Download PDF
Back to Top
NORMACONNECT® FLEX/ FLEX E - NORMA Americas Distribution Services

NORMACONNECT® Flex/ Flex E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR FLEX/FLEX E pipe couplings,  are used for axial non-restriaint connections for connecting  pipes, metal pipes, stainless pipes, as well concrete and plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and no special tools necessary
  • For Hot/Cold applications.          
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® REP/REP E - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E is the repair coupling. REP E couplings are for axial non-restraint couplings to stop leakages at pipes. They are used to connect and / or seal damaged metaland plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications.
  • Diameter Clamp Range: 34.5mm- 1222mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E axial restraint pipe couplings are used to connect metal pipes. The anchoring ring with conically stamped teeth indents into the pipe surface (steel, stainless steel or cast iron) for safe and strong axial restraint. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and anchoring ring with conically stamped teeth.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® COMBI GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E, axial restraint pipe couplings,  are an economical alternative to conventional pipe joining techniques for both plastic and metal pipes. Features short assembly times and the pipe couplings are reusable.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 37.5mm-410mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® PLAST GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/ PLAST GRIP E axial restraint pipe couplings are used to connect plastic pipes. The specially designed anchoring ring featuring flat rows of the teeth engages into the pipe surface without damaging the plastic material. Features a double-lip sealing system, standard strip insert and  anchoring ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP FP/ GRIP E-FP - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP  pipe couplings with integrated flame protection are used with applications in the marine sector (civil and military) as well in sprinkler systems. Features include a double-lip sealing system, standard strip insert, conically stamped anchoring ring, and flame protection housing.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® FGR RFP - NORMA Americas Distribution Services

NORMACONNECT® FGR RFP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR  RFP is a retrofittable flame protection housing that has been specially designed for use with all pipe couplings FLEX, GRIP, REP E. Its low weight allows for quick, easy assembly without any tools andflame resistant fibre mat provides a premium level of flame protection.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 26.9mm-323.9mm
  • Materials: Housing:  316 Stainless
Download PDF
Back to Top
R.G.RAY® LIGHT DUTY V-INSERT - NORMA Americas Distribution Services

R.G.Ray® Light Duty V-Insert

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® Light Duty V-Insert V-Band clamps have V-inserts welded to a low cost stainless steel worm gear clamp. Typical applications include dairy equipment, diesel engines and swimming pool equipment.

  • Diameter Range: 1  3/4" – 7" (45.5 mm – 178mm)
  • Fasteners: 5/16” (8mm) slotted hex head screw
  • Corrosion resistant steels
Download PDF
Back to Top
R.G.RAY® GENERAL PURPOSE V-INSERT - NORMA Americas Distribution Services

R.G.Ray® General Purpose V-Insert

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® General Purpose V-Insert V-Band clamps can develop high axial clamping force with high burst pressure capability. V-Inserts are welded to a flexible outer band. Typical appllications include heavy duty diesel engine exhaust and turbochargers.

  • Diameter Range: 2" and larger
  • Fasteners: #10, 1/4", 5/16", 3/8" or metric
  • Corrosive resistant and specialty steels

 

Download PDF
Back to Top
R.G.RAY® ROLL FORMED V-CLAMP - NORMA Americas Distribution Services

R.G.Ray® Roll Formed V-Clamp

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® Roll Formed V-Clamps have a conitnous V-retainer and partial outer band, compact profile to fit flanges having limited clearance. Applications include turbochargers, and particulate filters.

  • Diameters: 3 1/2" to 12"
  • Corrosive resistant steels
Download PDF
Back to Top
R.G.RAY® FLEX ROLL FORMED V-CLAMP - NORMA Americas Distribution Services

R.G.Ray® Flex Roll Formed V-Clamp

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® Flex Roll Formed V-Clamps have a partial outer band welded to two 180˚ V-retainers with an added flexible band segment (hinge) connection them. Applications typically include pumps and swimming pool filtration systems.

  • Diameter Range: 3 1/2" to 12"
  • Fasteners: 1/4"
  • Corrosion and heat resistant steels
Download PDF
Back to Top
BREEZE SECURE-SEAL J-SERIES CLAMP - NORMA Americas Distribution Services

Breeze Secure-Seal J-Series Clamp

Breeze - Logo - NORMA Americas Distribution Services

High-performance industrial pre-formed permanent hose clamp system.

  • 201 Stainless or Galvanized Steel Band
  • Heavy-Duty Stainless Steel Buckles
  • Diameter Range 1 1/4" – 8"
Download PDF
Back to Top
ABA 335 Merchandiser

ABA 335 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 335 Merchandiser is a dispenser featuring our most commonly ordered ABA hose clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top
ABA 244 Merchandiser

ABA 244 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 244 Merchandiser is a dispenser featuring our most commonly ordered clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top
Torca U-Bolt

Torca U-Bolt

Torca - Logo - NORMA Americas Distribution Services

The Torca U-Bolt is a low-cost alternative suitable for a wide range of non-slotted diameters of pipe joining applications.

  • Double Edge Clamp
  • 3/8" Bolt
  • Diameter Range: 1 1/2" - 6" (38mm - 152mm)
  • Materials: Carbon Steel or Zinc-Plated Steel
Download PDF
Back to Top
BREEZE Super-Seal - NORMA Americas Distribution Services

Super-Seal

Breeze - Logo - NORMA Americas Distribution Services

A breathrough constant tension clamp with dynamic compensation and ultra-secure sealing.
Worm-Drive Closure
Two Screw Options
Recommended Torque 90+/-5 in. -lbs.
Diameter Range 1.41" to 4.57" (36mm - 116mm)

Download PDF
Back to Top
BREEZE Super-Seal HD - NORMA Americas Distribution Services

Super-Seal HD

Breeze - Logo - NORMA Americas Distribution Services

A breakthrough constant tension clamp with dynamic compensation and ultra-secure sealing.
Worm-Drive Closure with proven Belleville Washer Spring technology for added sealing strength

Two Screw material Options

Recommended Torque 90+/-5 in. -lbs.
Diameter Range 1.41" to 4.57" (36mm - 116mm)

Download PDF
Back to Top

Sanitary/Drainage

BREEZE MINI - NORMA Americas Distribution Services

Breeze Mini

Breeze - Logo - NORMA Americas Distribution Services

A lightweight, streamlined clamp generally used in small diameter applications, such as air and fuel lines. The streamlined configuration allows for installation in tight-fitting or difficult-to-reach areas.

  • 5⁄16" (7.9mm) Band with Arcial Perforations
  • Diameter Range: 7⁄32" – 2½" (5.6mm – 64mm)
  • SAE Standard J1508 Type M
  • Three-Piece Construction
  • Plated 410, 300-Series SS and 316 Stainless Steel
Download PDF
Back to Top
BREEZE POWER-SEAL® - NORMA Americas Distribution Services

Breeze Power-Seal®

Breeze - Logo - NORMA Americas Distribution Services

A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength.

  • 1/2" Band with Arcial Perforations
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Diameter Range 7/16" – 7"
  • Plated, 410, 300-Series SS & 316 Stainless Steel
Download PDF
Back to Top
Breeze Aero Seal - NORMA Americas Distribution Services

Breeze Aero-Seal®

Breeze - Logo - NORMA Americas Distribution Services

The original perforated stainless steel worm-drive clamp for aircraft and industrial applications.

  • 9/16" Band with Arcial Perforations
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Diameter Range 7/16" – 12 1/4"
  • Three Screw Options
Download PDF
Back to Top
BREEZE LINER - NORMA Americas Distribution Services

Breeze Liner

Breeze - Logo - NORMA Americas Distribution Services

Liner clamps afford maximum protection to soft hoses while providing a true concentric seal.

  • 1/2" Lined Band
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Larger Sizes have 9/16" Band
  • Diameter Range 7/16" – 7"
  • Plated, 410 Stainless Steel
Download PDF
Back to Top
BREEZE MAKE-A-CLAMP kit - NORMA Americas Distribution Services

Breeze Make-A-Clamp

Breeze - Logo - NORMA Americas Distribution Services

A maintenance "clamp system" that allows you to make any size 100% stainless steel worm-drive clamp.

  • 1/2" Wide Continuous Roll of Banding Material
  • 9/16" Wide Fasteners
  • 100% Stainless Steel
  • Custom Diameter Ranges
  • 410 Stainless Steel Screw
Download PDF
Back to Top
NORMACONNECT® FLEX/ FLEX E - NORMA Americas Distribution Services

NORMACONNECT® Flex/ Flex E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR FLEX/FLEX E pipe couplings,  are used for axial non-restriaint connections for connecting  pipes, metal pipes, stainless pipes, as well concrete and plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and no special tools necessary
  • For Hot/Cold applications.          
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® REP/REP E - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E is the repair coupling. REP E couplings are for axial non-restraint couplings to stop leakages at pipes. They are used to connect and / or seal damaged metaland plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications.
  • Diameter Clamp Range: 34.5mm- 1222mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E axial restraint pipe couplings are used to connect metal pipes. The anchoring ring with conically stamped teeth indents into the pipe surface (steel, stainless steel or cast iron) for safe and strong axial restraint. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and anchoring ring with conically stamped teeth.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® COMBI GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E, axial restraint pipe couplings,  are an economical alternative to conventional pipe joining techniques for both plastic and metal pipes. Features short assembly times and the pipe couplings are reusable.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 37.5mm-410mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® PLAST GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/ PLAST GRIP E axial restraint pipe couplings are used to connect plastic pipes. The specially designed anchoring ring featuring flat rows of the teeth engages into the pipe surface without damaging the plastic material. Features a double-lip sealing system, standard strip insert and  anchoring ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP FP/ GRIP E-FP - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP  pipe couplings with integrated flame protection are used with applications in the marine sector (civil and military) as well in sprinkler systems. Features include a double-lip sealing system, standard strip insert, conically stamped anchoring ring, and flame protection housing.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® FGR RFP - NORMA Americas Distribution Services

NORMACONNECT® FGR RFP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR  RFP is a retrofittable flame protection housing that has been specially designed for use with all pipe couplings FLEX, GRIP, REP E. Its low weight allows for quick, easy assembly without any tools andflame resistant fibre mat provides a premium level of flame protection.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 26.9mm-323.9mm
  • Materials: Housing:  316 Stainless
Download PDF
Back to Top
R.G.RAY® LIGHT DUTY V-INSERT - NORMA Americas Distribution Services

R.G.Ray® Light Duty V-Insert

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® Light Duty V-Insert V-Band clamps have V-inserts welded to a low cost stainless steel worm gear clamp. Typical applications include dairy equipment, diesel engines and swimming pool equipment.

  • Diameter Range: 1  3/4" – 7" (45.5 mm – 178mm)
  • Fasteners: 5/16” (8mm) slotted hex head screw
  • Corrosion resistant steels
Download PDF
Back to Top
R.G.RAY® GENERAL PURPOSE V-INSERT - NORMA Americas Distribution Services

R.G.Ray® General Purpose V-Insert

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® General Purpose V-Insert V-Band clamps can develop high axial clamping force with high burst pressure capability. V-Inserts are welded to a flexible outer band. Typical appllications include heavy duty diesel engine exhaust and turbochargers.

  • Diameter Range: 2" and larger
  • Fasteners: #10, 1/4", 5/16", 3/8" or metric
  • Corrosive resistant and specialty steels

 

Download PDF
Back to Top
R.G.RAY® ROLL FORMED V-CLAMP - NORMA Americas Distribution Services

R.G.Ray® Roll Formed V-Clamp

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® Roll Formed V-Clamps have a conitnous V-retainer and partial outer band, compact profile to fit flanges having limited clearance. Applications include turbochargers, and particulate filters.

  • Diameters: 3 1/2" to 12"
  • Corrosive resistant steels
Download PDF
Back to Top
R.G.RAY® FLEX ROLL FORMED V-CLAMP - NORMA Americas Distribution Services

R.G.Ray® Flex Roll Formed V-Clamp

R.G.Ray - Logo - NORMA Americas Distribution Services

R.G.Ray® Flex Roll Formed V-Clamps have a partial outer band welded to two 180˚ V-retainers with an added flexible band segment (hinge) connection them. Applications typically include pumps and swimming pool filtration systems.

  • Diameter Range: 3 1/2" to 12"
  • Fasteners: 1/4"
  • Corrosion and heat resistant steels
Download PDF
Back to Top
BREEZE SECURE-SEAL J-SERIES CLAMP - NORMA Americas Distribution Services

Breeze Secure-Seal J-Series Clamp

Breeze - Logo - NORMA Americas Distribution Services

High-performance industrial pre-formed permanent hose clamp system.

  • 201 Stainless or Galvanized Steel Band
  • Heavy-Duty Stainless Steel Buckles
  • Diameter Range 1 1/4" – 8"
Download PDF
Back to Top
ABA 335 Merchandiser

ABA 335 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 335 Merchandiser is a dispenser featuring our most commonly ordered ABA hose clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top
ABA 244 Merchandiser

ABA 244 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 244 Merchandiser is a dispenser featuring our most commonly ordered clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top

Water Management

BREEZE MINI - NORMA Americas Distribution Services

Breeze Mini

Breeze - Logo - NORMA Americas Distribution Services

A lightweight, streamlined clamp generally used in small diameter applications, such as air and fuel lines. The streamlined configuration allows for installation in tight-fitting or difficult-to-reach areas.

  • 5⁄16" (7.9mm) Band with Arcial Perforations
  • Diameter Range: 7⁄32" – 2½" (5.6mm – 64mm)
  • SAE Standard J1508 Type M
  • Three-Piece Construction
  • Plated 410, 300-Series SS and 316 Stainless Steel
Download PDF
Back to Top
BREEZE POWER-SEAL® - NORMA Americas Distribution Services

Breeze Power-Seal®

Breeze - Logo - NORMA Americas Distribution Services

A general purpose automotive and industrial worm-drive hose clamp with arcial perforations for added strength.

  • 1/2" Band with Arcial Perforations
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Diameter Range 7/16" – 7"
  • Plated, 410, 300-Series SS & 316 Stainless Steel
Download PDF
Back to Top
Breeze Aero Seal - NORMA Americas Distribution Services

Breeze Aero-Seal®

Breeze - Logo - NORMA Americas Distribution Services

The original perforated stainless steel worm-drive clamp for aircraft and industrial applications.

  • 9/16" Band with Arcial Perforations
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Diameter Range 7/16" – 12 1/4"
  • Three Screw Options
Download PDF
Back to Top
BREEZE LINER - NORMA Americas Distribution Services

Breeze Liner

Breeze - Logo - NORMA Americas Distribution Services

Liner clamps afford maximum protection to soft hoses while providing a true concentric seal.

  • 1/2" Lined Band
  • Quadra-Lock Construction
  • SAE Standard J1508 Type F
  • Larger Sizes have 9/16" Band
  • Diameter Range 7/16" – 7"
  • Plated, 410 Stainless Steel
Download PDF
Back to Top
BREEZE MAKE-A-CLAMP kit - NORMA Americas Distribution Services

Breeze Make-A-Clamp

Breeze - Logo - NORMA Americas Distribution Services

A maintenance "clamp system" that allows you to make any size 100% stainless steel worm-drive clamp.

  • 1/2" Wide Continuous Roll of Banding Material
  • 9/16" Wide Fasteners
  • 100% Stainless Steel
  • Custom Diameter Ranges
  • 410 Stainless Steel Screw
Download PDF
Back to Top
NORMACONNECT® FLEX/ FLEX E - NORMA Americas Distribution Services

NORMACONNECT® Flex/ Flex E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR FLEX/FLEX E pipe couplings,  are used for axial non-restriaint connections for connecting  pipes, metal pipes, stainless pipes, as well concrete and plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and no special tools necessary
  • For Hot/Cold applications.          
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® REP/REP E - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E is the repair coupling. REP E couplings are for axial non-restraint couplings to stop leakages at pipes. They are used to connect and / or seal damaged metaland plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications.
  • Diameter Clamp Range: 34.5mm- 1222mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E axial restraint pipe couplings are used to connect metal pipes. The anchoring ring with conically stamped teeth indents into the pipe surface (steel, stainless steel or cast iron) for safe and strong axial restraint. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and anchoring ring with conically stamped teeth.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® COMBI GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E, axial restraint pipe couplings,  are an economical alternative to conventional pipe joining techniques for both plastic and metal pipes. Features short assembly times and the pipe couplings are reusable.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 37.5mm-410mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® PLAST GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/ PLAST GRIP E axial restraint pipe couplings are used to connect plastic pipes. The specially designed anchoring ring featuring flat rows of the teeth engages into the pipe surface without damaging the plastic material. Features a double-lip sealing system, standard strip insert and  anchoring ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP FP/ GRIP E-FP - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP  pipe couplings with integrated flame protection are used with applications in the marine sector (civil and military) as well in sprinkler systems. Features include a double-lip sealing system, standard strip insert, conically stamped anchoring ring, and flame protection housing.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® FGR RFP - NORMA Americas Distribution Services

NORMACONNECT® FGR RFP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR  RFP is a retrofittable flame protection housing that has been specially designed for use with all pipe couplings FLEX, GRIP, REP E. Its low weight allows for quick, easy assembly without any tools andflame resistant fibre mat provides a premium level of flame protection.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 26.9mm-323.9mm
  • Materials: Housing:  316 Stainless
Download PDF
Back to Top
ABA 335 Merchandiser

ABA 335 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 335 Merchandiser is a dispenser featuring our most commonly ordered ABA hose clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top
ABA 244 Merchandiser

ABA 244 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 244 Merchandiser is a dispenser featuring our most commonly ordered clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top

Ship Building/Repair

BREEZE CONSTANT TORQUE ® - NORMA Americas Distribution Services

Breeze Constant Torque ®

Breeze - Logo - NORMA Americas Distribution Services

A worm-drive hose clamp that automatically increases or decreases diameter due to changes in temperature.

  • 9/16" Band Width
  • Diameter Range 9/16"– 3 3/4"
  • 410 Stainless Steel Screw
  • SAE Standard J1508 Type SLF
Download PDF
Back to Top
Breeze Constant Torque - NORMA Americas Distribution Services

Breeze Constant Torque ® Heavy Duty

Breeze - Logo - NORMA Americas Distribution Services

A breakthrough in clamping technology. A belleville spring mechanism automatically increases or decreases the clamp diameter due to changes in operational or environmental temperatures to eliminate "cold flow" leaks.

Features an extended inner liner which protects all types of hoses from damage and helps to maintain consistent sealing pressure.

  • Extended Inner Liner
  • Constant-Tension Performance
  • SAE Standard J1508 Type SLF & SLHD
  • Diameter Range 1" – 9 1/8"
  • Plated or 410 Stainless Steel Screw
Download PDF
Back to Top
BREEZE T-BOLT - NORMA Americas Distribution Services

Breeze T-Bolt

Breeze - Logo - NORMA Americas Distribution Services

A stainless steel clamp performance-engineered for long-term durability and a wide variety of applications.

  • 3/4" Band Width
  • Floating Bridge
  • SAE Standard J1508 Type TB
  • Diameter Range 1 1/4" – 8 13/16"
  • Plated or 300-Series SS Bolt
Download PDF
Back to Top
BREEZE T-BOLT SPRING LOADED - NORMA Americas Distribution Services

Breeze T-Bolt Spring Loaded

Breeze - Logo - NORMA Americas Distribution Services

A constant-tension clamp with a spring designed for a variety of automotive, industrial, and marine applications.

  • 3/4" Band Width
  • Floating Bridge
  • Standard-Duty Spring
  • SAE Standard J1508 Type SLTB
  • Diameter Range 1 3/4" – 7 13/16"
Download PDF
Back to Top
BREEZE T-BOLT HEAVY DUTY SPRING LOADED - NORMA Americas Distribution Services

Breeze T-Bolt Heavy Duty Spring Loaded

Breeze - Logo - NORMA Americas Distribution Services

A constant-tension clamp with a spring designed for a variety of automotive, industrial, and marine applications.

  • 3/4" Band Width
  • Floating Bridge
  • Heavy-Duty Spring
  • SAE Standard J1508 Type SLTB
  • Diameter Range 2 1/16" – 8 5/8"

 

Download PDF
Back to Top
BREEZE HI-TORQUE ™ - NORMA Americas Distribution Services

Breeze Hi-Torque ™

Breeze - Logo - NORMA Americas Distribution Services

The Hi-Torque is the world's strongest worm-gear clamp and features all-stainless-steel construction.

  • 5/8" Band Width
  • Inner Liner Available
  • SAE standard J1508 Type HD
  • Diameter Range 1" – 9 1/8"
  • 410, 300-Series SS & 316 Stainless Steel Screw
Download PDF
Back to Top
BREEZE AEROSPACE AND MIL SPEC CLAMPS - NORMA Americas Distribution Services

Breeze Aerospace and "Mil" Spec clamps

Breeze - Logo - NORMA Americas Distribution Services

Military and aerospace clamps that meet federal supply class 4730.

  • All Stainless Steel
  • Meets Federal Supply Class 4730
  • Diameter Range 7/16" – 10 5/16"
  • SAE Standard J1508 Low Pressure Type F
Download PDF
Back to Top
ABA ORIGINAL S50(W5) - NORMA Americas Distribution Services

ABA Original S50(W5)

ABA - Logo - NORMA Americas Distribution Services

An embossed worm-drive hose clamp with a one-piece housing, and an embossed band with rolled edges.

  • Embossed Band with Rolled Edges
  • Acid-Resistant Steel
  • SAE Standard J1508 Type FE
  • Diameter Range 15mm – 308mm
Download PDF
Back to Top
ABA SAFE™ W4 - NORMA Americas Distribution Services

ABA Safe™ W4

ABA - Logo - NORMA Americas Distribution Services

A constant-tension worm-drive clamp that protects soft hoses against damage.

  • 12mm Band Width
  • Concave Liner to Protect Soft Hoses
  • Innovative Jointless Housing
  • Diameter Range 32mm – 112mm
  • Slotted Hex-Head Screw
  • 301 Stainless Steel Cold Rolled Liner
  • Stainless Steel Housing
Download PDF
Back to Top
ABA NOVA ALL STAINLESS S50 (W5) - NORMA Americas Distribution Services

ABA Nova All Stainless S50 (W5)

ABA - Logo - NORMA Americas Distribution Services

A non-perforated worm-drive hose clamp with a rolled-edge band that is an ideal choice for smaller dimension hoses.

  • Embossed 9mm Band with Rolled Edges
  • Innovative Jointless Housing
  • SAE Standard J1508 Type FE
  • Diameter Range 8mm – 20mm 
  • All 316 Stainless Steel
  • Slotted Hex-Head Screw
Download PDF
Back to Top
NORMACONNECT® FLEX/ FLEX E - NORMA Americas Distribution Services

NORMACONNECT® Flex/ Flex E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR FLEX/FLEX E pipe couplings,  are used for axial non-restriaint connections for connecting  pipes, metal pipes, stainless pipes, as well concrete and plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and no special tools necessary
  • For Hot/Cold applications.          
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® REP/REP E - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E is the repair coupling. REP E couplings are for axial non-restraint couplings to stop leakages at pipes. They are used to connect and / or seal damaged metaland plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications.
  • Diameter Clamp Range: 34.5mm- 1222mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E axial restraint pipe couplings are used to connect metal pipes. The anchoring ring with conically stamped teeth indents into the pipe surface (steel, stainless steel or cast iron) for safe and strong axial restraint. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and anchoring ring with conically stamped teeth.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® COMBI GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E, axial restraint pipe couplings,  are an economical alternative to conventional pipe joining techniques for both plastic and metal pipes. Features short assembly times and the pipe couplings are reusable.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 37.5mm-410mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® PLAST GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/GRIP E

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/ PLAST GRIP E axial restraint pipe couplings are used to connect plastic pipes. The specially designed anchoring ring featuring flat rows of the teeth engages into the pipe surface without damaging the plastic material. Features a double-lip sealing system, standard strip insert and  anchoring ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP FP/ GRIP E-FP - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP  pipe couplings with integrated flame protection are used with applications in the marine sector (civil and military) as well in sprinkler systems. Features include a double-lip sealing system, standard strip insert, conically stamped anchoring ring, and flame protection housing.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® FGR RFP - NORMA Americas Distribution Services

NORMACONNECT® FGR RFP

Norma - Logo - NORMA Americas Distribution Services

NORMACONNECT® FGR  RFP is a retrofittable flame protection housing that has been specially designed for use with all pipe couplings FLEX, GRIP, REP E. Its low weight allows for quick, easy assembly without any tools andflame resistant fibre mat provides a premium level of flame protection.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 26.9mm-323.9mm
  • Materials: Housing:  316 Stainless
Download PDF
Back to Top
FiveStar 27-Series Barrel Band Clamp

FiveStar 27-Series Barrel Band Clamp

FiveStar 27-Series Barrel Band Clamps have a heavy duty, high strength, 3/4 inch stainless steel band with an M6 socket head cap screw, barrel nut and trunnion hardware for a sleek, low-profile design. Designed for a wide variety of automotive, commercial vehicle, and industrial applications.

  • Diameter Range: 1" – 13.75" (25.4 mm – 349.25mm)
  • .025"x 3/4” stainless band
  • M6-1.0mm hex screw, barrel nut and trunnion
  • CRS, zinc plated hardware
Download PDF
Back to Top
FiveStar Quick Release V-Clamp

FiveStar Quick-Release V-Clamp

FiveStar Quick-Release V-Clamps are designed with high quality v-inserts welded to a quick-release outer band to allow for quick assembly and ease of use in equipment that requires constant service. Available with or without the knob.

  • Diameter Range: 1.09" and larger
  • Various band thickness available
  • 1/4"-28 hardware
  • Corrosion resistant steels
  • 1/4"-28 plastic knob with brass insert or nut available
Download PDF
Back to Top
FiveStar Spring-Loaded Barrel Band Clamp

FiveStar Spring-Loaded Barrel Band Clamp

FiveStar 27-MSP Spring-Loaded Barrel Band Clamps have a heavy duty, high strength design with a 3/4" stainless steel band. The spring-loaded design combines the ability to constantly seal in hot and cold temperatures and/or varying pressure with a lower profile design. Full-round edges to prevent hose damage. Designed for a wide variety of automotive, commercial vehicle, and industrial applications.

  • .025" x3/4" stainless band
  • M6-1.0mm hex screw, barrel nut and trunnion
  • CRS, zinc plated hardware
  • Diameter Range: 1" – 13.75" (25.4 mm – 349.25mm)
Back to Top
FiveStar Heavy Duty Barrel Band Clamp

FiveStar Heavy Duty Barrel Band Clamp

FiveStar 27-MHD Series Heavy Duty Barrel Band Clamps have a .040"x3/4" stainless steel band with an M6 hex screw, barrel nut and trunnion hardware for a sleek, low-profile, yet heavy duty clamp. Designed for a wide variety of automotive, commercial vehicle, and industrial applications.

  • .040" x 3/4" stainless band
  • M6 hex screw
  • Diameter Range: 1" – 13.75" (25.4 mm – 349.25mm)
Download PDF
Back to Top
FiveStar 200 Series T-bolt Clamp

FiveStar 200 Series T-Bolt Clamp

FiveStar 200-Series T-Bolt has a heavy duty, high strength design with a 3/4" stainless steel band with a shoe and 1/4"-28 hardware that's available in zinc plated or all stainless versions. Designed for a wide variety of automotive, industrial and marine applications.

  • .025" x 3/4" stainless band
  • 1/4”-28 Plated Steel T-bolt
  • Diameter Range: 1" – 13.88" (25.4 mm – 352.55mm)
Download PDF
Back to Top
FiveStar 250 Series Spring-Loaded T-Bolt

FiveStar 250 Series Spring-Loaded T-Bolt

FiveStar 250-Series Spring-Loaded T-Bolt has a heavy duty, spring-loaded design to maintain constant tension in varying conditions. Featuring a 3/4" stainless steel band with a shoe and 1/4"-28 hardware that's available in zinc plated or all stainless versions. Designed for a wide variety of automotive, industrial and marine applications.

  • .025" x 3/4" stainless band
  • 1/4"-28 Plated Steel T-Bolt
  • Diameter Range: 2.06"- 8.56" (51.56mm - 217.42mm)
Download PDF
Back to Top
FiveStar Quick-Release T-Bolt Mounting Clamp

FiveStar Quick-Release T-Bolt Mounting Clamp

FiveStar Quick-Release T-Bolt Mounting Clamps feature a 3/4" wide stainless steel band with 1/4"-28 zinc plated hardware and bracket. Available with a wing nut or nylon insert lock nut. Designed for a wide variety of automotive and industrial applications.

  • .025"-.75" stainless band
  • 1/4"-28 plated t-bolt and nut
  • 1/4"-1" stainess latch
  • .080"-1.13" stainless bracket
  • Diameter Range: 2.19" -9.37" (55.63 mm - 238.0mm)
Download PDF
Back to Top
FiveStar Strap Clamp

FiveStar Strap Clamp

FiveStar Strap Clamps feature a 3/4 " wide stainless steel band with 1/4"-28 plated steel T-bolt and hardware. Offered in flat, round or custom lengths & shapes. Designed to mount reservoirs, oil coolers, and tanks in automotive, commercial vehicle, and industrial applications.

  • .025" or .035" stainless band
  • 1/4"-28 plated hardware
  • Custom lengths available
Download PDF
Back to Top
FiveStar General Purpose V-Clamp

FiveStar General Purpose V-Clamp

Five Star General Purpose V-Clamps are high quality V-inserts welded to a band clamp with full round edges. Typically used to join or seal flanged tubing, piping or containers in heavy duty diesel engines, turbochargers, or industrial applications.

  • Diameter Range: 1.09" and larger
  • 1/4" or 5/16" hardware available
  • Corrosion  resistant steels
Download PDF
Back to Top
ABA 335 Merchandiser

ABA 335 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 335 Merchandiser is a dispenser featuring our most commonly ordered ABA hose clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top
ABA 244 Merchandiser

ABA 244 Merchandiser

ABA - Logo - NORMA Americas Distribution Services

The ABA 244 Merchandiser is a dispenser featuring our most commonly ordered clamp sizes.

  • Wall Hanging
  • Aluzinc
Download PDF
Back to Top

ABA - Logo - NORMA Americas Distribution ServicesBreeze - Logo - NORMA Americas Distribution ServicesNorma - Logo - NORMA Americas Distribution ServicesR.G.Ray - Logo - NORMA Americas Distribution ServicesTorca - Logo - NORMA Americas Distribution Services

© 2017 NORMA Americas | Member of NORMA Group | Created by Media Genesis