Norma Group - Logo - NORMA Americas Distribution Services

NORMA Americas Distribution Services featuring:

 

ABA - Logo - NORMA Americas Distribution ServicesBreeze - Logo - NORMA Americas Distribution ServicesNorma - Logo - NORMA Americas Distribution ServicesFiveStar - Logo - NORMA Americas Distribution ServicesR.G.Ray - Logo - NORMA Americas Distribution ServicesTorca - Logo - NORMA Americas Distribution Services

Call Today

1-855-NORMA-2U

667-6228

For Vehicle OE Solutions

 
Norma - Banner - NORMA Americas Distribution Services

featuring

NORMACLAMP® TORRO®

A non-perforated worm-drive hose clamp ideally suited to applications with high mechanical loads

  • 7.5mm – 12mm Band Widths
  • Three-Piece Construction
  • Diameter Range 8mm – 160mm
  • Aluzinc, Galvanized & Other Stainless Steels
Norma - Logo - NORMA Americas Distribution Services Norma Clamp Torro - NORMA Americas Distribution Services

Browse Featured Products

Norma Clamp Torro - NORMA Americas Distribution Services NORMACLAMP® TORRO® PDF
NORMACONNECT® COMBI GRIP/GRIP E - NORMA Americas Distribution Services NORMACONNECT® COMBI GRIP/GRIP E PDF
NORMAQUICK® PS3 - NORMA Americas Distribution Services NORMAQUICK® PS3 PDF
1-855-Norma-2U Where To Buy >>

 

about NORMA

Founded in 1949, NORMA is one of the world’s leading system manufacturers in clamping and connecting technologies. For over 50 years, NORMA has developed, produced and delivered customer-specific system solutions for every type of industrial requirement. The company’s R&D teams use state-of-the-art laboratory equipment and technologies to rapidly translate customer requirements into trend-setting products – from the simple retaining clip to complete tube and connector systems. NORMA products connect and fix any part or system safely and reliably, even in difficult installation conditions, while ensuring the highest product quality and short assembly times.

 

 

Hose Clamps

Norma Clamp Torro - NORMA Americas Distribution Services

NORMACLAMP® TORRO®

A non-perforated worm-drive hose clamp ideally suited to applications with high mechanical loads

  • 7.5mm – 12mm Band Widths
  • Three-Piece Construction
  • Diameter Range 8mm – 160mm
  • Aluzinc, Galvanized & Other Stainless Steels
Download PDF
Back to Top
NORMACLAMP® TORRO® WF - NORMA Americas Distribution Services

NORMACLAMP® TORRO® WF

A constant-tension clamp equipped with a spring insert on the inside of the clamp band.

  • 9mm & 12mm Band Widths
  • Three-Piece Construction
  • Diameter Range 8mm – 110mm
  • Aluzinc, Galvanized & Other Stainless Steels 
  • Constant-Tension Spring Insert
Download PDF
Back to Top
NORMACLAMP® GBS - NORMA Americas Distribution Services

NORMACLAMP® GBS

Heavy-Duty clamp, ideal for fastening compressed air hoses with high degrees of hardness or plastic/steel reinforcement.

  • 18mm – 30mm Band Widths
  • Exceptionally High Tensile Force
  • Diameter Range 17mm – 304mm
  • Aluzinc, Galvanized & Other Stainless Steels
  • Hollow Trunnions
Download PDF
Back to Top
NORMACLAMP® FBS - NORMA Americas Distribution Services

NORMACLAMP® FBS

Constant-tension hose clamps, ideal for spigot systems that are exposed to significant temperature fluctuations.

  • 12mm Band Width
  • C75S with Zinc/Aluminum Coating
  • Diameter Range 13mm – 83mm
  • C75S with Zinc (no chromium)
  • Automatic Re-Tensioning
Download PDF
Back to Top
NORMACLAMP® COBRA - NORMA Americas Distribution Services

NORMACLAMP® COBRA

One-piece, bolt-free, low-profile "crimp" style connectors.

  • 7mm & 8mm Band Widths
  • Bolt-Free Construction
  • All 304 Stainless Steel
  • Diameter Range 8mm – 32mm
Download PDF
Back to Top

Mounting/Retaining Products

NORMAFIX® RS/RSGU - NORMA Americas Distribution Services

NORMAFIX® RS/RSGU

Retaining clip for pipes, cables, cable harnesses, cable-protection pipes, hoses and other lines.

  • 12mm – 20mm Band Widths
  • Aluzinc/Galvanized or 316 Stainless Steel
  • Diameter Range 6mm – 40mm
  • EPDM Rubber Cushion
Download PDF
Back to Top
NORMAFIX® RLGU - NORMA Americas Distribution Services

NORMAFIX® RLGU

NORMAFIX®  RLGU pipe retaining clips are suitable for retaining pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

  • 12mm Band
  • Diameter Range:3/8” –1 9/16" (10mm – 40mm)
  • Materials: Aluzinc/ galvanized steel [W1]
Back to Top

Pipe Couplings

NORMACONNECT® FLEX/ FLEX E - NORMA Americas Distribution Services

NORMACONNECT® Flex/ Flex E

NORMACONNECT® FGR FLEX/FLEX E pipe couplings,  are used for axial non-restriaint connections for connecting  pipes, metal pipes, stainless pipes, as well concrete and plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and no special tools necessary
  • For Hot/Cold applications.          
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® REP/REP E - NORMA Americas Distribution Services

NORMACONNECT® REP/REP E

NORMACONNECT® REP/REP E is the repair coupling. REP E couplings are for axial non-restraint couplings to stop leakages at pipes. They are used to connect and / or seal damaged metaland plastic pipes. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and  protection ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications.
  • Diameter Clamp Range: 34.5mm- 1222mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® GRIP/GRIP E

NORMACONNECT® GRIP/GRIP E axial restraint pipe couplings are used to connect metal pipes. The anchoring ring with conically stamped teeth indents into the pipe surface (steel, stainless steel or cast iron) for safe and strong axial restraint. Features a double-lip sealing system, standard strip insert, heavy duty lock bars, and anchoring ring with conically stamped teeth.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 26.4mm- 170.1mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® COMBI GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® COMBI GRIP/GRIP E

NORMACONNECT® COMBI GRIP/GRIP E, axial restraint pipe couplings,  are an economical alternative to conventional pipe joining techniques for both plastic and metal pipes. Features short assembly times and the pipe couplings are reusable.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 37.5mm-410mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® PLAST GRIP/GRIP E - NORMA Americas Distribution Services

NORMACONNECT® PLAST GRIP/GRIP E

NORMACONNECT® PLAST GRIP/ PLAST GRIP E axial restraint pipe couplings are used to connect plastic pipes. The specially designed anchoring ring featuring flat rows of the teeth engages into the pipe surface without damaging the plastic material. Features a double-lip sealing system, standard strip insert and  anchoring ring.

  • No welding and No special tools necessary
  • For Hot/Cold applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® GRIP FP/ GRIP E-FP - NORMA Americas Distribution Services

NORMACONNECT® GRIP FP/ GRIP E-FP

NORMACONNECT® GRIP FP/ GRIP E-FP  pipe couplings with integrated flame protection are used with applications in the marine sector (civil and military) as well in sprinkler systems. Features include a double-lip sealing system, standard strip insert, conically stamped anchoring ring, and flame protection housing.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 40mm-406mm
  • Materials: Housing: 304, 316 Stainless Inner Ring: EPDM/NBR
Download PDF
Back to Top
NORMACONNECT® FGR RFP - NORMA Americas Distribution Services

NORMACONNECT® FGR RFP

NORMACONNECT® FGR  RFP is a retrofittable flame protection housing that has been specially designed for use with all pipe couplings FLEX, GRIP, REP E. Its low weight allows for quick, easy assembly without any tools andflame resistant fibre mat provides a premium level of flame protection.

  • No welding and No special tools necessary
  • For Hot/Cold marine applications
  • Diameter Clamp Range: 26.9mm-323.9mm
  • Materials: Housing:  316 Stainless
Download PDF
Back to Top

Quick Connectors

CRAIG C-STYLE (0˚PROFILE) - NORMA Americas Distribution Services

Series C-Style (0˚profile)

Craig Assembly C-Style  “push and seal” plastic quick connectors are ideal for joining lines used to transport media in cooling water, glycol, and water applications. They also are excellent in charged-air systems. Designed for the VDA standard spigot. Feature a positive retainer ring mechanism for tight locking seal and available with hose barb stem for use with aftermarket hose and clamps.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 0˚profile (Straight)
  • Inside Diameters: (12mm – 50mm)
Download PDF
Back to Top
CA SERIES C-STYLE - NORMA Americas Distribution Services

Series C-Style (45° Profile)

CA Series C-Style  “push and seal” plastic quick connectors are ideal for joining lines used to transport media in cooling water, glycol, and water applications. They also are excellent in charged-air systems. Designed for the VDA standard spigot. Feature a positive retainer ring mechanism for tight locking seal and available with hose barb stem for use with aftermarket hose and clamps.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 45˚ standard profile
  • Inside Diameters: (12mm – 50mm)
Download PDF
Back to Top
CRAIG C-STYLE (90˚STANDARD PROFILE) - NORMA Americas Distribution Services

Series C-Style (90˚ profile)

Craig Assembly C-Style  “push and seal” plastic quick connectors are ideal for joining lines used to transport media in cooling water, glycol, and water applications. They also are excellent in charged-air systems. Designed for the VDA standard spigot. Feature a positive retainer ring mechanism for tight locking seal and available with hose barb stem for use with aftermarket hose and clamps.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 90˚ standard profile
  • Inside Diameters: (12mm – 50mm)
Download PDF
Back to Top
CRAIG SAE-STYLE (0˚ STRAIGHT PROFILE) - NORMA Americas Distribution Services

Series SAE-Style (0˚ profile)

Craig Assembly SAE-Style Quick Connector are designed to connect media carrying lines on automobiles and have been developed for fuel system applications. Used for both line-to-line and line-to-device connections. Available with single hose barb for use with aftermarket hose and clamps. Features include an internal retainer mechanism for tight locking seals.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 0˚ Straight profile
  • Outside Spigot Diameters: 5⁄8" and ¾"
Download PDF
Back to Top
CRAIG SAE-STYLE (45˚ STANDARD PROFILE) - NORMA Americas Distribution Services

Series SAE-Style (45˚ profile)

Craig Assembly SAE-Style Quick Connector are designed to connect media carrying lines on automobiles and have been developed for fuel system applications. Used for both line-to-line and line-to-device connections. Available with single hose barb for use with aftermarket hose and clamps. Features include an internal retainer mechanism for tight locking seals.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 45˚ standard profile
  • Outside Spigot Diameters: 5⁄8" and ¾"
Download PDF
Back to Top
CA Series SAE-STYLE - NORMA Americas Distribution Services

Series SAE-Style (90° Profile)

CA Series SAE-Style Quick Connector are designed to connect media carrying lines on automobiles and have been developed for fuel system applications. Used for both line-to-line and line-to-device connections. Available with single hose barb for use with aftermarket hose and clamps. Features include an internal retainer mechanism for tight locking seals.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 90˚ standard profile
  • Outside Spigot Diameters: 5⁄8" and ¾"
Download PDF
Back to Top
NORMAQUICK® PS3 - NORMA Americas Distribution Services

NORMAQUICK® PS3

NORMAQUICK® PS3 “push and seal” plastic quick connectors are ideal for joining lines used to transport media in cooling water and heating applications. They also are excellent in charged-air systems. Designed for the VDA standard spigot.

  • Materials: Injection Molded Thermoplastics, EPDM O-rings
  • 0˚,45˚, and 90˚ standard profiles
  • Inside Diameter Range: 8mm-50mm
Download PDF
Back to Top
NORMAQUICK® S - NORMA Americas Distribution Services

NORMAQUICK® S

NORMAQUICK® S are SAE J2044 Quick Connectors. S plastic quick connectors are designed to connect media carrying lines on automobiles and have been developed for fuel system applications. Used for both line-to-line and line-to-device connections.

  • Materials: Injection Molded Thermoplastics, EPDM O-rings
  • 0˚,45˚, and 90˚ standard profiles
  • Outside Spigot Diameters: 1/4"- 5/8" (8mm, 10mm,14mm)
Download PDF
Back to Top
NORMAQUICK®TWIST II - NORMA Americas Distribution Services

NORMAQUICK®Twist II

NORMAQUICK® Twist II are designed to connect plastic air intake, charge air and cooling water system pipes in order to get leak-proof connections. By using the TWIST II connector system, you can combine your design with plastic, aluminum or steel tubes. Features  robust and clear locking features with a click function to ensure a correct lock.

  • Temperature resistance of up to 180°
  • Material: Polyamide 6.6 with 30% to 50% glass fiber, EPDM O-Rings
  • 0˚, and 90˚ standard profiles
  • Application-specific sizes
Download PDF
Back to Top
NORMAQUICK® V2 - NORMA Americas Distribution Services

NORMAQUICK® V2

NORMAQUICK® V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. Used for both line-to-line and line-to-device connections.

  • Material: Injection Molded Thermoplastics, EPDM O-Rings
  • 0˚, and 90˚ standard profiles/ over 200 custom profiles
  • Inside Spigot Diameters: 4mm – 33mm
Download PDF
Back to Top

ABA - Logo - NORMA Americas Distribution ServicesBreeze - Logo - NORMA Americas Distribution ServicesNorma - Logo - NORMA Americas Distribution ServicesR.G.Ray - Logo - NORMA Americas Distribution ServicesTorca - Logo - NORMA Americas Distribution Services

© 2017 NORMA Americas | Member of NORMA Group | Created by Media Genesis