HI-TORQ™ 125 clamps feature thicker shields and flexible rigidity provides maximum strength to maintain alignement and resist shear forces in demanding below grade applications. HI-TORQ™ couplings have two clamps for sizes though 4" (100) , Four clamps on sizes 5" (125mm)- 10" (250mm) and Six clamps on sizes larger than 10 inches.
HI-TORQ™ 80 clamps offer a unique flexible rigidity that provides the strength required to maintain hydrostatic integrity even under severe stress. Feature a slotted design to compensate for mismatched pipe/ fitting diameter and maintains alignment. alignement and resist shear forces in demanding below grade applications. HI-TORQ™ 80 couplings have two clamps for sizes though 4" (100) , Four clamps on sizes 5" (125mm)- 10" (250mm)
The outer grooves of the bushing nest into the HI-TORQ coupling gaskets or to other Snap-All bushings to provide an interlocking water tight, gas tight seal. Bushings are one piece molded neoprene; the same material used for HI-TORQ™ coupling gaskets.
Our Clamp-All brand has been producing hubless couplings for over 30 years. The Clamp-all coupling was designed to fulfill a need in the plumbing industry for a heavy duty coupling to join storm and sanitary drain, waste and vent (DWV) piping systems above and below grade. Clamp-All couplings use materials designed specifically for high corrosion resistance, long term durability, maximum strength and ease of conformance to the pipe. Clamp-All couplings demonstrate their superior performance, allowing each coupling to be used with confidence in high risk jobs—schools, hospitals, jails, museums, sports facilities, commercial and industrial projects…without a failure…ever!
The Clamp-All® HI-TORQ™ 125 couplings have the thickest, strongest shield and the highest torque clamps in the industry and are effective for joining all high risk DWV piping system; above or below ground, up to 15 PSI (105kPa) working pressure. Durable one-piece molded Neoprene gaskket,complies with ASTM C-564, and features two sets of sealing beads and a unique inter-locking design for greater seal area and stability.
The Clamp-All® HI-TORQ™ 80 coupling is engineered to be the most cost effective way to join any hubless DWV systems in high risk environments are effective for stacks, mains, branches and vents above and below ground. Durable one-piece molded Neoprene gaskket,complies with ASTM C-564, and features two sets of sealing beads and a unique inter-locking design for greater seal area and stability.
Snap-All® Increaser/Reducer Transition bushings from Clamp-All® are the easiest and fastest way to make transitions between pipes of different diameters and/or materials. From 3⁄4" copper to 10" hubless cast iron, clay, plastic or steel, Snap-All bushings take the hassle out of any DWV transition.